| Customization: | Available |
|---|---|
| Type: | Piezoresistive Pressure Sensor |
| For: | Diffused Silicon Pressure Transmitter |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Parameters | MIN. | TYP. | MAX. | |
| Linearity %FS,BFSL | ±0.15 | ±0.25 | ||
| Repeatability %FS | ±01 | |||
| Hysteresis %FS | ±0.05 | ±0.1 | ||
| Zero output mV DC | ±1 | |||
| FS Output mV DC | 50 | |||
| Zero thermal error%FS/ºC | ±0.02 | |||
| FS Thermal error %FS/ºC | ±0.03 | |||
| Compensated temperature ºC | -10~70 | |||
| Storage temperature ºC | -20ºC~70ºC | |||
| Long-term Stability %FS/year | ±0.2 | ±0.3 | ||
| Pressure Range | 0~17kPa...100kPa ….7MPa | |||
| Electric Performance |
Power supply | 1.5mA (typ) | ||
| Electric connection | Kovar pin or 100mm silicon rubber flexible wires | |||
| Input impedance | 2kΩ~6kQ | |||
| Output impedance | 2kΩ~6kΩ | |||
| Insulation resistor | 250MQ/250VDC | |||
| Overpressure | 2times FS | |||
| Pressure type | G:Gauge;A:Absolute;S:Sealed gauge | |||
| Media compatibility | The gas or liquid which is compatible with construction material and Viton | |||
| Impact | 100g(11ms) | |||
| Position | Deviate 45°from any orientation,zero change ≤0.05%FS | |||
| Construction | Diaphragm/Housing | stainless steel 316L | ||
| Pin lead wire | Silicone flexible wire | |||
| O-ring | Viton(fluororubber) | |||
| Net weight | 30g(general type) | |||
| JC-CG01 Pressure sensor | |||||||
| Model Description | |||||||
| JC-CG01 Diameter 19mm O Ring mounting | |||||||
| Code Power Supply | |||||||
| C 1.5mA | |||||||
| V | 5V(typical),other(OEM) | ||||||
| Code | Pressure Range | Gauge | Absolute | Seal Gauge | |||
| 17K | 0~17KPa | * | |||||
| 35K | 0~35KPa | * | |||||
| 70K | 0~70KPa | * | |||||
| 100K | 0~10OKPa | * | * | ||||
| 200k | 0~200KPa | * | * | ||||
| 350K | 0~350KPa | * | * | ||||
| 700K | 0~70OKPa | * | * | ||||
| 1.4M | 0~1.4MPa | * | * | ||||
| 2.1M | 0~2.1MPa | * | * | ||||
| 3.5M | 0~3.5MPa | * | * | ||||
| 7M | 0~7MPa | * | * | ||||
| Code | Pressure type | ||||||
| G | Vent Gauge Pressure (W/O vent tube as default) | ||||||
| A | Absolute Pressure | ||||||
| S | Sealed Gauge | ||||||
| Note: | Code Electrical Connection 2 Silicone flexible wire |
||||||
Note:
1. Least squares fitting straight line
2. Compared with the output of 25 °C in the compensation temperature range
3. Can be used for over-range or down-range, and the amplitude is controlled within±50%FS.
4. The maximum pressure of the system should be less than the overload protection limit of the sensor, otherwise it will affect the service life of the product and damage the product.
5. The commonly used compensation method for products is 1.5mA constant current compensation.
6. Do not force to pull the pins or the leads of sensitive components.
7. Protect the isolation diaphragm at the front end of the pressure sensitive component to prevent the impact of the pressure sensitive component from damaging the sensitive component.
8. If you have special requirements on product performance parameters and functions, please contact us.
About Jiucheng
Product Packaging:
We choose cartons and protective pads that can be recycled. This will maximize the protection of our products from damage during transportation.
Product Transportation:
We only choose the global express service providers. We will deliver the goods to you at the most efficient speed.
){kind=link}