JC-CZ12 Flush Diaphragm Pressure Sensor

• Customization: Available
• Type: Piezoresistive Pressure Sensor
• For: Diffused Silicon Pressure Transmitter
• Model NO.: JC-CZ12
• Output Signal Type: Analog Type
• Production Process: Integration
• Material: Stainless Steel
• Certification: CE
• Customized: Customized
• Pressure Range: 0~10MPa
• Operable Temperature Range: -40~125
• Tipical Output: 0~100mv
• Power Supply: 1.5mA
• Transport Package: Standard Exporting Carton
• Trademark: JC
• Origin: Nanjing, China
• Production Capacity: 5000 Pieces Per Month

Product Description

JC-CZ12 Flush diaphragm pressure sensor with fitting Overview:
JC-CZ12 series are based on piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The sensing package Utilizes silicon oil to transfer pressure from the 316L diaphragm to the sensing element. The sensor was welded in front end of a fitting(M20*1.5 or G1/2 made by Stainless Steel 304).

JC-CZ12 Flush diaphragm pressure sensor with fitting  Features:
-Measuring range: 0kPa~100kPa…10MPa
-Gauge, absolute, seal gauge pressure  
-constant current and voltage supply 
-Isolated structure for a variety of fluid media   
-Φ12.6mm, small size OEM Pressure sensitive components
-stainless steel 316L material / Hastelloy C material 
-Widely temperature compensation -10ºC~80ºC

JC-CZ12 Flush diaphragm pressure sensor with fitting  Application:
-Industrial Process Control
-Level measurement
-gas liquid pressure measurement
-Pressure testing instruments, pressure calibration equipment
-Air Navigation Inspection
-Hydraulic system and switch
-Refrigeration equipment and air conditioning 

Note:
The electrical connection is based on the connection marked on the product parameter card.
1. Dashed left arrow resistance bridge circuit for the sensitive chip bridge.
2 without ceramic compensation board, an external resistor to compensate for zero and temperature drift, the connection as shown. Access to zero resistance R3 (R4), another resistor R4 (R3) shorted as negative power supply; R1 or R2,only one for the zero temperature drift compensation resistor, the another one opens, Choose according to the information provided by the parameter card; R5 is for the sensitivity of temperature compensation resistor, it is recommended that the external compensation resistor be as close as possible to the pressure sensitive element.


Performance Parameters:

Specifications of current excitation(1.5mA,25ºC)
Parameters		Min.	Typical	Max.
Accuracy(%FS)	40Kpa		±0.20	±0.30
Non-Linearity'	>40Kpa		±0.10	±0.20
Hysteresis			±0.05	±0.10
Repeatibility			±0.05	±0.10
Zero²Output(mV)		-5	±1.0	5
Span(FS)Output(mV)		70
Operation  Temp. (ºC)³		-40		125
Compensated	40Kpa	0		50
Temp. (ºC)	>40Kpa	-10		70
Zero  Temp.error(%FS)^4			±0.75	±1.0
Span  Temp.error(%FS)^4			±0.75	±1.0
Thermal hysteresis(%FS)			0.1
Long term Stability/Zero(±%FS annual)			0.1
Long term Stability/Span(±%FS annual)			0.1
Supply Current(mA)		0.5	1.5	2
Input Resistance(KΩ)		2	2.5	3
Output Resistance(KΩ)		2.5	3	3.7
Load  Resistance^5(MΩ)		5
Insulation  Resistance(100V^6(MΩ)		100
Pressure Range		0-40Kpa...10Mpa
Overpressure	≤4Mpa	2X
	7Mpa	1.5X
Pressure Media		Liquids and gases compatible with 316L/304L SS

Remark:
1. Best fit straight line.

2. Measured at vacuum for absolute (A), ambient for gage (G).

3. Maximum temperature range for product with standard cable is -20°C to +105°C.

4. Over the compensated temperature range with respect to 25°C.

5. Load resistance to reduce measurement errors due to output loading.

6. Between case and sensing element.

Ordering information:

JC-CZ12 Pressure sensor
Model                    Description
JC-CZ12	Flush Diaphragm sensor(SS 304 fitting)
	Code	Power Supply
	C	Constant Current
	Code		Pressure Range		Gauge		Absolute
		40K	0~40KPa		*
	100K		0~100KPa		*		*
		160K	0~160KPa		*		*
		400K	0~400KPa		*		*
		600k	0~600KPa		*		*
		1M	0~1MPa		*		*
		1.6M	01.6MPa		*		*
		2.5M	0~2.5MPa		*		*
		4M	0~4MPa		*		*
		7M	0~7MPa		*		*
		10M	0~10MPa
	XX		Customized
		Code		Pressure type
		G		Vent Gauge Pressure(W/O vent tube as default)
		GT		Vent Gauge Pressure(With vent tube)
		A		Absolute Pressure
			Code			Fitting
				1		M20X1.5(Stainless Steel 304)
				2		G1/2(Stainless Steel 304)
				X		Customized

Note:

1. Can provide vacuum test sensor of vent gauge, need consulted with factory

2. Can provide constant voltage sensor as required(Specification refer to JC-CZ11 series)

3. Compared with the output of 25 °C in the compensation temperature range

4. Can be used for down-range, and the amplitude is controlled within ±50%FS.

5. The maximum pressure of the system should be less than the overload protection limit of the sensor, otherwise it will affect the service life of the

product and damage the product.

6. The commonly used compensation method for products is 1.5mA constant current compensation.

7. Do not force to pull the pins or the leads of sensitive components.

8. Protect the isolation diaphragm at the front end of the pressure sensitive component to prevent the impact of the pressure sensitive component

from damaging the sensitive component.

9. If you have special requirements on product performance parameters and functions, please contact us.