Jc630d Micro Differential Pressure Transmitter

• Customization: Available
• Material: Stainless Steel
• Certification: CE
• Model NO.: JC630D
• Maximun Static Pressure: ≤20MPa
• Overall Accuracy: ±0.1~±0.5%Fs
• Zero Temperature Error: ±0.02~±0.05%Fs/ºC
• Sensitivity Temperature Error: ±0.02~±0.05%Fs/ºC
• Influence of Static Pressure: ±0.05%Fs/100kpa
• Long-Term Stability: ±0.1~±0.3%Fs/Year
• Range of Power Supply: 12~36V DC
• Response Time: ≤2 Ms
• Insulation Resistance: 100mΩ,500VDC
• Weight: 0.35kg
• Trademark: jiucheng
• Origin: Nanjing, China

Product Description

JC630D Micro Differential Pressure Transmitter Overview:
JC630D Differential Pressure Transducer adopts foreign-made differential pressure sensitive chips and special transducer integrated circuits as well as high-performance keycomponents and strict production process to ensure that this series product features superior performance, small dimensions and easy installation. Therefore, it is the optimum choice for micro differential pressure, flow field, flow rate, and flow measurement.

JC630D Micro Differential Pressure Transmitter Features:
* High cost performance
* Reliable and stable performance
* Range of differential pressure: 0 ~ 10KPa ... 2MPa
* Resistant to static pressure of up to 20MPa
* Fully made of stainless steel, with small dimensions, light weight, and easy installation 


JC630D Micro Differential Pressure Transmitter Application:
* Industrial process control
* Medical instrument 
* Aerodynamic measurement 
* Hydraulic and pneumatic equipment 
* Flow measurement

Technical Parameters:

Measuring range	0~10KPa…2 MPa
Full scale range	10~ 50KPa	50~100KPa	0.1~0.2MPa	0.2~0.5MPa	0.5~1MPa	1~2MPa
Positive permissible overpressure	250KPa	300KPa	0.4MPa	1.0MPa	2MPa	4MPa
Negative permissible overpressure	100KPa	200KPa	0.3MPa	0.5MPa	0.7MPa	1MPa
Maximun static pressure	≤20MPa
Overall accuracy (linearity +  repeatability+ hysteresis)	±0.1%FS			±0.25%FS		±0.5%FS
Zero temperature error	±0.02%FS/ºC(typical)			±0.05%FS/ºC(maximum)
Sensitivity temperature error	±0.02%FS/ºC(typical)			±0.05%FS/ºC(maximum)
Influence of static pressure	±0.05%FS/100KPa
Operating temperature	-10~80ºC
Compensation temperature	-10~50ºC
Long-term stability	±0.3%FS/year(≤200kPa)			±0.1%FS/year(≥200kPa)
Range of power supply	12~36V DC(generally 24V DC)
Output signal	Two-wire 4~20mA DC, three-wire 0/1~5V DC
Response time	≤2 ms
Insulation resistance	100MΩ,500VDC
Influence of vibration	≤1% change after vibration at 3gRMS 30~2000Hz
Impact	≤1% change after impact of 100g for 10ms
Service life	1×108pressure cycles
Medium	The liquid or gas adapting to structural material
Enclosure protection class	Plug-in type(IP65); cable type(IP67)
Safety and explosion protection	Ex iaII CT5(intrinsically safe explosion-proof type)
Weight	Approx 0.35kg
Thermal hysteresis	±0.1%FS(typical value)
Enclosure protection class	Plug-in type(IP65); cable type(IP67)

Ordering Information:

JC630D	Micro Differential Pressure Transmitter
	Range	Measuring range( 0~ X  KPa or MPa)
		Code	Overall accuracy (linearity + repeatability+ hysteresis)
		1	±0.5%FS
		2	±0.25%FS
		3	±0.1%FS
			Code	Signal output (standard power supply)
			A1	4~20mA   (12~36V DC)
			V1	1~5V DC    (12~36V DC)
			V2	0~5V DC    (12~36V DC)
			V3	0.5~4.5V DC  (12~36V DC)
				Code	Additional functions
				F1	M20x1.5 external thread
				F2	G1/4 internal thread
				F0	Special
				W1	Cable type(IP67,2m)
				W2	Socket type(IP65,DIN43650)
				E	Intrinsically safe explosion-proof type Ex iaIICT5
JC631 (0~50KPa)     -1      -A1      -F2     -W1          Micro Differential Pressure Transmitter

Tips for Type Selection
* In order to guarantee safe and reliable operation of the transducer, it is recommended that the three-valve manifold should be installed between the point to be measured and the transducer to ensure that the medium to be measured is slowly and evenly applied on the positive and negative chambers.
* During installation, it is recommended that pressure connections on both ends should be located above the horizontal line so as to minimize the influence of the installation position on the product.
* During type selection, please note that the static pressure to be measured shall be less than 20MPa and the overpressure to be applied on the positive and negative chambers shall not exceed the specified value of the product.
* As an additional function code for type selection, the code "E" for intrinsically safe explosion-proof type Ex iaIICT6 denotes that power source must be supplied via safety barrier.
* For other special requirements, please discuss with us and clearly indicate them in the order.



 

About Jiucheng

Qualification and Certificate:



Product Packaging:
We choose cartons and protective pads that can be recycled. This will maximize the protection of our products from damage during transportation.

Product Transportation:
We only choose the global express service providers. We will deliver the goods to you at the most efficient speed.