| Customization: | Available |
|---|---|
| Measuring range: | -100KPa~0~1KPa…20KPa.… |
| Pressure type: | Gauge pressure or absolute pressure |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High- frequency Dynamic Pressure Transducer
In military engineering, chemical explosion test, petroleum investigation and exploitation, petroleum well test, material,
| Measuring range | -100KPa~0~1KPa…20KPa...100MPa | |||
| Overload capacity | Two times FS pressure ((1.1 times FS pressure for 100MPa product) | |||
| Pressure type | Gauge pressure or absolute pressure | |||
| Measured medium | Gas or liquid compatible with 316 stainless steel | |||
| Overall accuracy | ±0.1 %FS | ±0.25%FS | ±0.5%FS | |
| Intrinsic frequency | 150KHz~700KHz | 500KHz~1MHz | 1MHz~2MHz | |
| Band width of transducer | 0~1KHz~3KHz | 0~20KHz | 0~200KHz | |
| Rise time | 0~0.2mS~75μS | 0~12μS | 0~1μS | |
| Long-term stability | Typical: ±0.1%FS/ year | Maximum: ±0.2%FS/ year | ||
| Operating temperature | -40ºC~85ºC generally | -10ºC~250ºC specially | ||
| Zero point temperature drift | Typical: ±0.02%FS/ºC | Maximum: ±0.05%FS/ºC | ||
| Sensitivity temperature drift | Typical:±0.02%FS/ºC | Maximum: ±0.05%FS/ºC | ||
| Range of power supply | 12~36VDC (24VDC generally) | ±15VDC standard switching power supply | ||
| Signal output | 4~20mA / 1~5 V DC / 0~5V DC | |||
| Load resistance | ≤(U-12)/0.02Ω | |||
| Enclosure protection degree | Plug-in type (IP65); cable type (IP67) | |||
| Vibration error | ≤±0.01%FS(Axles X, Y, Z ,200Hz/g) | |||
| Port and enclosure | Stainless steel 1Cr18Ni9Ti | |||
| O-ring | Fluo rubber | |||
| Sensor diaphragm | Stainless steel 316L or mono - crystalline silicon | |||
| Safe explosion- proof | Ex ia IICT6 | |||
| Insulation resistance | 100MΩ,500V DC | |||
| Resolution | Infinite small (theoretical) 1 / 100000 (general) | |||
| JC690 | High-frequency Dynamic Pressure Transducer | ||||||
| Code | Pressure type | ||||||
| G | Gauge pressure ( G, may not be indicated) | ||||||
| A | Absolute pressure (A) | ||||||
| Range | ( 0~ X KPa or MPa) Measuring Range | ||||||
| Code | Band width of transducer | ||||||
| H1 | 0~1KHz~3KHz | ||||||
| H2 | 0~20KHz | ||||||
| H3 | 0~200KHz | ||||||
| Code | Overall accuracy (linear + repeatability + lagging) | ||||||
| 1 | ±0.5%FS | ||||||
| 2 | ±0.25%FS | ||||||
| 3 | ±0.1%FS | ||||||
| Code | Signal Output | ||||||
| A1 | 4~20mA | ||||||
| V1 | 1~5V DC | ||||||
| V2 | 0~5V DC | ||||||
| Code | Additional functions | ||||||
| F1 | M20x1.5 external thread | ||||||
| F2 | G1/4 external thread | ||||||
| F0 | Special | ||||||
| W1 | Cable type (IP67, 2m) | ||||||
| W2 | Socket type (IP65, DIN 43650) | ||||||
| P | Flush diaphragm | ||||||
| E | Intrinsically safe explosion-proof type Ex iaIICT5 | ||||||
| T1 | Free field (specially used for blasting) | ||||||
| T2 | High - temperature resistant type: Up to 250 ºC for balanced use,Up to 2000 ºC for transient use | ||||||
| JC690(0~500KPa)-H1 -1 -V2 -F1 -W1 -E - T2 High-frequency Dynamic Pressure Transducer | |||||||
Our products have been fallen into six categories totaling hundreds of specifications in dozens of series. Main products include: high-accuracy pressure sensor, general-purpose pressure transmitter, liquid level transmitter, anti-lightning/anti-corrosive liquid level transmitter, special pressure transmitter for air conditioner, refrigeration and compressor, special pressure transmitter for oilfield and mining well, economical pressure sensor and transmitter, ceramic capacitor pressure transmitter, vacuum pressure transmitter, sapphire pressure transmitter, digital pressure transmitter, micro differential pressure / air pressure transmitter, intelligent digital pressure gauge, intelligent digital pressure switch, anti-corrosive pressure transmitter, anti-explosive pressure transmitter, hygienically flat-membrane pressure transmitter, high-temperature pressure transmitter, high-frequency pressure transmitter, micro pressure transmitter, integrated temperature transmitter, and capacitance pressure transmitter.
Established in 2006, Nanjing Jiucheng technology Co., Ltd is R&D and production of pressure measuring and controlling instruments. It has introduced the internationally advanced production technology, equipment and process as well as strict product quality standards and ODM cooperation concept to China, so as to manufacture and sell JC pressure / differential pressure / liquid level sensors and transmitters in mainland China.
1.Q: Are you manufacturer or trading company?
A: We are manufacturer which established for 19 years.
2.Q: What's your advantage?
A: We are your technical solutions provider and specialists in resolving complex operational challenges.
3. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
4. Q: What is lead time of your product?
A: 7-15 working days with customization.
5. Q: Can you provide customized products?
A: Yes, we can laser mark your logo on products; OEM and ODM customization are welcomed.
6. Q: What is your MOQ?
A: We have no MOQ limit, even 1 pieces is acceptable.
7.Q:What's your transport?
A: Express such as DHL, FedEx, TNT, UPS for freight prepaid; and we can also use your own courier account to do the freight collect. For more goods we can arrange by air or by Sea.
8. Q: Do you provide customized products?
A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.
9.Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 12 months after shipment, and our after-sales DPT will respond with your questions in 24hrs, remote instruction by PC network is always available.
){kind=link}