JC621-42 Immersion Hydraulic Liquid Pressure Level Transducer Overview:
The measurement of water or liquid level using hydrostatic equilibrium system is an important application of pressure sensors. The high-sensitivity silicon piezoresistive sensitive element fabricated with micromachining technology is the critical component of the liquid level transducer, supported with the special cable provided with an air tube as well as special water-tightness technology, which not only ensures the water tightness of immersion transducers, but also makes the reference pressure chamber connect with the ambient atmosphere, so as to attain accurate measurement results and excellent stability. JC621-42 immersion hydraulic liquid pressure level transducer adopts the internationally advanced dry ceramic capacitive sensor or temperature-compensating isolation diaphragm diffused silicon pressure sensor as a sensing element to greatly enhance operating performance of the product. It can be extensively used for the measurement and control of water and liquid levels in petroleum, chemical, power generation plant, urban water supply & drainage and hydrologic exploration fields, etc..
JC621 Immersion Hydraulic Liquid Pressure Level Transducer Features:
* Split structure: The section of the sensor thrown into the liquid is of fully-sealed stainless steel structure, wherein the enclosure of the electronic circuit is of cast aluminum structure for easy alignment & adjustment and wiring.
* Integrated structure: Both the sensor and the amplified circuit are provided in the fully-sealed enclosure made of stainless steel, without external alignment and adjustment.
* The enclosure of the sensor is designed with IP68 and the junction box is designed with IP65.
* This product takes the high-performance pressure sensor as the measuring element, with high accuracy, small dimensions, easy operation, strong antijamming capability, high reliability, good stability, high sensitivity, water resistance and anti-condensation.
* The product is of free maintenance, as well as easy installation and commissioning. It can be directly thrown into the water to measure the height of liquid level from the transducer end to the liquid surface.
As shown in Figure 1, for installation in the water tank, water tower and other static water, generally the sensing end is directly thrown into the bottom of the water tank as far away from the pump and valve position as possible. The wiring section of the transducer is provided within the junction box, with the outgoing line pointing downward, to prevent water from penetrating into the airway tube of the air-guiding cable. Meanwhile, remember not to block the airway tube.
As shown in Figure 2, for installation in the water dam, water well and other flowing water, a steel tube with an inner diameter of approximately φ45mm is generally inserted into the water channel, where some small holes shall be drilled at the same height opposite to the water flow direction so that water can smoothly flow into the tube. The wiring section of the transducer is provided within the junction box, with the outgoing line pointing downward, to prevent water from penetrating into the airway tube of the air-guiding cable. Meanwhile, remember not to block the airway tube.
Figure 3 shows threaded or flanged connection of the split liquid level transducer in the open-hole vessel, wherein thread size or flange size are G 1 / 2 and DN20 respectively or customized.
Technical Parameters:
| Measuring range (FS) |
0~0.5m…200mH2O or 0~5KPa…2MPa |
| Permissible overpressure |
Two times of full-scale pressure |
| Measuring media |
The liquid compatible with 316 stainless steel ( Corrosion-proof type can be selected under special conditions) |
| Overall accuracy |
±0.25%FS |
±0.5%FS |
±1%FS |
| Long-term stability |
Typical:±0.1%FS/year |
Maximum:±0.2%FS/year |
| Operating temperature range |
Integrated: -20ºC~70ºC |
Split (plug-in):-20ºC~80ºC |
| Compensation temperature range |
Integrated:-10ºC~55ºC |
Split (plug-in):-10ºC~70ºC |
| Zero-point temperature drift |
Typical:±0.02%FS/ºC |
Maximum:±0.05%FS/ºC |
| Full-scale temperature drift |
Typical:±0.02%FS/ºC |
Maximum:±0.05%FS/ºC |
| Range of power supply |
12~36VDC(generally 24VDC) |
| Signal output |
4~20mA/1~5VDC/ 0~5VDC |
| Load resistance |
≤(U-10)/0.02Ω |
| Structural material |
Enclosure: stainless stee1 Cr18Ni9Ni |
Diaphragm: stainless steel 316L |
| Sealing: fluoro rubber |
Cable:Φ7.2mm special PVC cable |
| Insulation resistance |
100MΩ,50VDC |
| Protection class |
Enclosure protection class IP68 |
| Safety and explosion protection |
Ex iaII CT5 |
| Response time |
≤2 ms |
| Weight |
Approx. 250g |
| Resolution |
Infinitely small(theoretic),1/100000(normal) |
Ordering Information:
| JC621 |
Immersion Hydraulic Liquid Pressure Level Transducer |
| |
Measuring range |
0~X mH2O or 0~X KPa |
| |
Code |
Structural form (maximum operating range) |
| C1 |
Integrated: 0~200mH2O |
| C2 |
Split: 0~10mH2O |
| C3 |
Plug-in: 0~4 mH2O |
| |
Code |
Overall accuracy (linearity + repeatability + hysteresis) |
| 0 |
1.0%FS |
| 1 |
0.4%FS |
| 2 |
0.25%FS |
| |
Code |
Signal output(standard power supply) |
| A1 |
4~20mA (12~36V DC) |
| V1 |
1~5V DC (12~36V DC) |
| V2 |
0~5V DC (12~36V DC) |
| S1 |
RS485 (5~15V DC) |
| |
Code |
Additional functions |
| F1 |
G1 1/2 male thread(split and plug-in) |
| F2 |
DN20 flange(split and plug-in) |
| F0 |
Special |
| E |
Intrinsically safe explosion-proof type Ex iaIICT5 |
| R |
Corrosion-proof type |
| JC621 (0~10mH2O) -C1 -1 -A1 -E Immersion Hydraulic Liquid Pressure Level Transducer |
Tips for Type Selection
* The medium to be measured shall be compatible with the material contacting with the product. Meanwhile, the density of the medium to be measured during measurement shall be indicated (except for water).
* As an additional function code for type selection, the code "E" for intrinsically safe explosion-proof type Ex ia II CT5 denotes that power source must be supplied via safety barrier.
* The length of cable shall be L = X m + 1m. Please indicate any extension (if needed) when placing an order.
* To install the product in thunderous areas, select HM21F Anti-lightning Liquid Level Transducer when placing an order.
* The corresponding relationship of 1m water columns with pressure under standard conditions ( i.e. 4ºC, g = 9.80665 m / s2):1mH2O=0.1kgf/cm2(Kgf /cm2 )=9.8kPa(KPa)
* For other special requirements, please discuss with us and clearly indicate them in the order.
Our products have been fallen into six categories totaling hundreds of specifications in dozens of series. Main products include: high-accuracy pressure sensor, general-purpose pressure transmitter, liquid level transmitter, anti-lightning/anti-corrosive liquid level transmitter, special pressure transmitter for air conditioner, refrigeration and compressor, special pressure transmitter for oilfield and mining well, economical pressure sensor and transmitter, ceramic capacitor pressure transmitter, vacuum pressure transmitter, sapphire pressure transmitter, digital pressure transmitter, micro differential pressure / air pressure transmitter, intelligent digital pressure gauge, intelligent digital pressure switch, anti-corrosive pressure transmitter, anti-explosive pressure transmitter, hygienically flat-membrane pressure transmitter, high-temperature pressure transmitter, high-frequency pressure transmitter, micro pressure transmitter, integrated temperature transmitter, and capacitance pressure transmitter.
Established in 2006, Nanjing Jiucheng technology Co., Ltd is R&D and production of pressure measuring and controlling instruments. It has introduced the internationally advanced production technology, equipment and process as well as strict product quality standards and ODM cooperation concept to China, so as to manufacture and sell JC pressure / differential pressure / liquid level sensors and transmitters in mainland China.
Exhibition & Our Partners
1.Q: Are you manufacturer or trading company?
A: We are manufacturer which established for 19 years.
2.Q: What's your advantage?
A: We are your technical solutions provider and specialists in resolving complex operational challenges.
3. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
4. Q: What is lead time of your product?
A: 7-15 working days with customization.
5. Q: Can you provide customized products?
A: Yes, we can laser mark your logo on products; OEM and ODM customization are welcomed.
6. Q: What is your MOQ?
A: We have no MOQ limit, even 1 pieces is acceptable.
7.Q:What's your transport?
A: Express such as DHL, FedEx, TNT, UPS for freight prepaid; and we can also use your own courier account to do the freight collect. For more goods we can arrange by air or by Sea.
8. Q: Do you provide customized products?
A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.
9.Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 12 months after shipment, and our after-sales DPT will respond with your questions in 24hrs, remote instruction by PC network is always available.
Audited Supplier 
){kind=link}