JC100 Integrated Temperature Transmitter / Sensor Overview:
JC100 series of industrial thermal resistor, as a temperature measurement sensor, is usually used together with temperature transducer, regulator and display instrument to form a process control system for direct measurement or control of the temperature of liquid, vapor and gas media as well as solid surface within -200ºC~500ºC in various production processes. The thermal resistor measures temperature by using the characteristic that the resistance itself changes with the change of temperature of substance. When temperature gradient exists in the measured medium, the temperature measured is the average temperature of the medium where temperature-sensing element is located. Although the appearance of all thermal resistors varies widely, their basic structure is roughly similar, generally including such major components as temperature-sensing element, insulation casing, protective tube and junction box.
JC100 Integrated Temperature Transmitter / Sensor Features:
* German temperature sensor, with high temperature measurement accuracy.
* Simple installation and a variety of temperature ranges optional.
* Gas-liquid dual-purpose, any medium compatible with 316L.
* German thin-film resistive element, with rapid thermal response speed and reliable and stable performance.
* Good long-term stability, low energy consumption and small size.
* Compression spring-type temperature sensor, with good vibration resistance.
* Automatic compensation of cold end temperature, using non-linear correction circuit.
JC100 Integrated Temperature Transmitter / Sensor Working Principle:
Thermal resistor measures temperature by using the characteristic that the resistance itself changes with the change of temperature of substance. When the resistance changes, the bridge passing through the temperature transducer will produce an unbalanced signal, which is converted into 4-20mA DC signal after being amplified, and then the working instrument will show the corresponding temperature value.
JC100 Integrated Temperature Transducer Application:
* Piping and ventilation system
* Hydraulic and pneumatic system
* Cooling system and heating system
* Water supply and hot water system
* Air conditioning system
Technical Parameters:
| Measuring range |
-200ºC~500ºC |
| Measured medium |
Gas or liquid compatible with 304 or 316L stainless steel |
| Output |
Sensor (PT100);transducer (two-wire system 4-20mA+HART protocol) |
| Power supply |
10~36V DC |
| Overall accuracy |
±0.5%FS ;±0.25%FS;±0.1%FS |
| Allowable error |
Graduation PT100:Grade A(±0.15+0.002 IHI);Grade B(±0.30+0.005 ItI) |
| Withstand voltage |
Typical:40bar(Max:300bar) |
| Long-term stability |
±0.1%FS/year |
| Response time |
T=50ºC 2.3s;T=90ºC 5.4s |
| Electrical protection |
Reverse polarity protection and optional surge voltage protection |
| Ambient temperature |
-40~+85ºC |
| Storage temperature |
-40~+125ºC |
| Installation mode |
Plug-in (insertion depth:beyond 50mm thread;can be customized) |
| Probe dimensions |
Φ12,Φ8,Φ6(mm),others |
| Liquid-contacting material |
304 stainless steel,316 stainless steel,316L stainless steel lined PTFE |
| Damping |
Adjustable 0-32 seconds |
| Protection degree |
IP65;IP67 |
| Resistance to mechanical vibration |
10~60HZ,0.21mm sine wave |
| ARFI |
IEC61000-4-3,20V/M,80~1000MHZ |
| Executive standard |
IEC584;IEC1515;GB/T16839-199;JB/T5582-91 |
Ordering Information:
Tips for Type Selection
* The measured medium shall be compatible with the material contacting with the product.
* Please contact us for other special requirements and clearly indicate them in the order.
More Pressure Sensor / Transmitter
Audited Supplier 
){kind=link}