| Customization: | Available |
|---|---|
| Type: | Diffused Silicon Pressure Sensor |
| For: | Diffused Silicon Pressure Transmitter |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Parameter | MIN | TYP | MAX |
| Non-linear %FS,BFSL | ±0.15 | ±0.25 | |
| Repeat %FS | ±0.05 | ±0.075 | |
| Hysteresis %FS | ±0.05 | ±0.075 | |
| Zero output mV DC** | ±2.0 | ||
| Full-scale output mV DC | 45 | ||
| Zero temperature error %FS,reference 25ºC | ±0.75 | ±1.0 | |
| FS temperature error %FS,reference 25ºC | ±0.75 | ±1.0 | |
| Compensation temperature ºC | 0~50 | ||
| Operating temperature ºC | -40~125 | ||
| Storage temperatureºC | -40~125 | ||
| Long-term stability %FS/year | ±0.2 |
| Electrical performance | Power supply | ≤2.0mA DC ;≤10V DC |
| Electrical connection | Gold plated Kovar pin | |
| Common-mode voltage output | 50% of output (TYP.) | |
| Input resistance | 2.5kΩ~5kΩ | |
| Output resistance | 3.5kΩ~6kΩ | |
| Response time(10%~90%) | <1ms | |
| Insulation resistance | 100MΩ,100VDC | |
| Allow overpressure | 1.5 times of full-scale | |
| Structural performance | Diaphragm | 316L |
| Housing | 316L | |
| Pin | Gold plated Kovar pin | |
| Seal ring | Fluoro rubber | |
| Net weight | Approx.. 11g | |
| Environmental conditions | Location impact | Deviation from 90° in any direction, zero point change ≤±0.05%FS |
| vibration | No change at 10gRMS, (20~2000)Hz | |
| Impact | 100g,11 ms | |
| Media compatibility | liquid or gas Compatible with housing materials and fluoro rubber | |
| Base condition | Medium temperature | (25±1)ºC |
| Ambient temperature | (25±1)ºC | |
| Vibration | 0.1g(1m/s2)Max | |
| Humidity | (50%±10%)RH | |
| Ambient pressure | (86~106)kPa | |
| Power supply | (1.5±0.0015)mA DC |
Diffused Silicon Pressure Sensor JC-CM05 Ordering Information:
| JC-CM05 Diffused silicon pressure sensor | |||||||
| Model | Description | ||||||
| JC-CM05 | Dia.Φ19mm | ||||||
| Code | Pressure range | Pressure type | Code | Pressure range | Pressure type | ||
| 20K | 0~20KPa | G | 350K | 0~350KPa | G,A | ||
| 35K | 0~35KPa | G,A | 700K | 0~700KPa | G,A | ||
| 70K | 0~70KPa | G,A | 1M | 0~1MPa | G,A | ||
| 100K | 0~100KPa | G,A | 2M | 0~2MPa | G,A | ||
| 200K | 0~200KPa | G,A | 3.5M | 0~3.5MPa | G,S,A | ||
| Code | Pressure Type | ||||||
| G | Gauge | ||||||
| A | Absolute | ||||||
| S | Seal Gauge | ||||||
| Code | Pressure connection | ||||||
| 0 | " O "fluororubber seal ring | ||||||
| code | Compensation temperature | ||||||
| L | Laser compensation | ||||||
Note:
1. The assembly method of pressure sensitive components is recommended to use a "floating" structure to avoid tight sealing at the end face and prevent the stability of pressure sensitive components.
2. Take care to protect the diaphragm of the front end of the pressure sensitive element so as not to affect the performance of the pressure sensitive element or damage the pressure sensitive element.
3. The temperature range of O-type fluoroelastomer seals that are standard for sensitive components is -20°C~250°C. Please contact our company when the working temperature range of the sensitive components is lower than -20°C or if the sensitive components are used in harsh media.
About Jiucheng
Qualification and Certificate:
Product Packaging:
We choose cartons and protective pads that can be recycled. This will maximize the protection of our products from damage during transportation.
Product Transportation:
We only choose the global express service providers. We will deliver the goods to you at the most efficient speed.
){kind=link}