JC-CZ04 Piezoresistive Pressure Sensor Overview:
JC-CZ04 piezoresistive pressure sensor is based on piezoresistive pressure sensors packaged in a 316L stainless steel housing. The sensing package utilizes silicon oil to transfer pressure from the 316L diaphragm to the sensing element. Each piezoresistive silicon pressure sensor was strictly temperature compensated for both zero and span. Jiucheng is a high quality manufacturer from China.
JC-CZ01 Piezoresistive Pressure Sensor Overview:
JC-CZ01 piezoresistive pressure sensor are based on piezoresistive silicon pressure sensors packaged in a 316L stainless steel housing. The sensing package utilizes silicon oil to transfer pressure from the 316L diaphragm to the sensing element.
JC-CZ01 piezoresistive pressure sensor is designed for o-ring mounting for the applications where compatibility with corrosive media is required. Each sensor at the factory have carried out a strict zero and full temperature compensation to ensure the accuracy of measurement in complex environments.
JC-CG01Piezoresistive Pressure Sensor Overview:
JC-CG01 series piezoresistive pressure sensors adopt high-sensitivity piezoresistive silicon chip inside for pressure sensing. The chip is protected against ambient influences by a stainless steel housing sealed with a concerntrically corrugated diaphragm. The housing is filled with silicone oil for the transfer of the pressure from the diaphragm to the sensing component, exchanging the pressure into mV electrical output signal.
JC-CT02 Piezoresistive Pressure Sensor Overview:
JC-CT02 piezoresistive pressure sensor is a 19 mm small profile, media compatible, piezoresistive pressure sensor packaged in a 316L stainless steel housing. The JC-CT02 compensated isdesigned for o-ring mounting and OEM applications where compatibility with corrosive media is required. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element. A ceramic substrate is attached to the package that contains laser-trimmed resistors for temperature compensation and offset correction. An additional laser-trimmed resistor is included which can be used to adjust an external differential amplifier and provide span interchangeability to within ±1%
JC-CW02 Piezoresistive Pressure Sensor Overview:
JC-CW02 piezoresistive pressure sensor are based on piezoresistive pressure sensors packaged in a 316L stainless steel housing. The sensing package utilizes silicon oil to transfer pressure from the 316L diaphragm to the sensing element.Each sensor was strictly temperature compensated for both zero and span.There are two options of excitation power - current and voltage.
Technical Parameters:
JC-CZ04 Piezoresistive Pressure Sensor
Excitation voltage 10VDC, Environment temperature 25ºC
| Parameter |
Min. |
Typical |
Max. |
| Accuracy(%FS) |
| Non-linear |
40Kpa |
|
±0.20 |
±0.30 |
| ≥100Kpa |
|
±0.15 |
±0.30 |
| Hysteresis |
|
±0.05 |
±0.10 |
| Repeatability |
|
±0.05 |
±0.10 |
| Zero Output(FS) |
-2 |
±1 |
2 |
| Full-scale output(FS) |
50 |
100±1 |
150 |
| Temperature characteristic |
|
|
|
| Operating temperature(ºC) |
-40 |
|
125 |
| Compensation temperature(ºC) |
0 |
|
70 |
| Zero temperature error (%FS) |
-0.75 |
±0.5 |
0.75 |
| Full-scale temperature error (%FS) |
-0.75 |
±0.5 |
0.75 |
| Temperature hysteresis(%FS) |
|
0.1 |
|
| Long-term stability(±%FS/year) |
|
|
|
| Zero |
|
0.2 |
|
| Full scale |
|
0.2 |
|
| Power supply(VDC) |
|
10 |
14 |
| Input resistance(kΩ) |
6 |
8 |
10 |
| Output resistance(kΩ) |
2.5 |
3.0 |
3.7 |
| Output load resistance( MΩ) |
5 |
|
|
| Pressure range |
0-40Kpa…2.5Mpa |
| Pressure overload |
2Xrated pressure or 3.5Mpa |
| Breaking pressure |
3Xrated pressure or 4Mpa |
| Measuring medium |
Clean gas compatible with ceramic, glass, silicone(range less than 1MPa)/epoxide-resin glue(range more than 1MPa) |
JC-CZ01 Piezoresistive Pressure Sensor
Excitation current 1.5mA, Environment temperature 25ºC
| Parameter |
MIN |
TYP |
MAX |
| Accuracy (%FS)non-linear |
40Kpa |
|
±0.10 |
±0.15 |
| 100 Kpa ~7MPa |
|
±0.10 |
±0.20 |
| 10Mpa ~70MPa |
|
±0.20 |
±0.30 |
| Hysteresis |
|
±0.05 |
±0.10 |
| Repeatability |
|
|
±0.05 |
±0.10 |
| Zero output(mV) |
0-40Kpa…7MPa |
-2 |
±1 |
2 |
| 0-10MPa…70MPa |
-1 |
±0.5 |
1 |
| Full scale output (FS) |
0-40Kpa…7MPa |
50 |
100 |
150 |
| 0-10MPa…70MPa |
50 |
100 |
200 |
| Operating temperature(ºC) |
-40 |
|
125 |
| Compensation temperature(ºC) |
40Kpa |
0 |
|
50 |
| 100Kpa |
0 |
|
70 |
| 100Kpa-70MPa |
-10 |
|
70 |
| Zero temperature Error(%FS) |
0-40Kpa…7MPa |
|
±0.75 |
±1.0 |
| 0~10MPa…70MPa |
|
±0.5 |
±0.75 |
| Full-scale temperature Error(%FS) |
|
±0.75 |
±1.0 |
| Temperature Hysteresis(%FS) |
|
0.1 |
|
| Zero long-term stability(±%FS/year) |
|
0.1 |
|
| Full-scale long-term stability(±%FS/year) |
|
0.1 |
|
| Supply Current(mA) |
0.5 |
1.5 |
2 |
| Input resistance (kΩ) |
0-40Kpa…7MPa |
2 |
2.5 |
3 |
| 0-10MPa…70MPa |
3 |
4.5 |
6 |
| Output resistance (kΩ) |
0-40Kpa…7MPa |
2.5 |
3 |
3.7 |
| 0-10MPa…70MPa |
3.5 |
5 |
6.5 |
| Output load resistance(MΩ) |
5 |
|
|
| Insulation resistance(MΩ/50V) |
0-40Kpa…7MPa |
50 |
|
|
| 0-10MPa…70MPa |
100 |
|
|
Excitation voltage 10VDC, Environment temperature 25ºC,
the following informations apply only to 0~40KPa…7MPa
| Parameter |
MIN |
TYP |
MAX |
| Accuracy (%FS)non-linear |
40Kpa |
|
±0.20 |
±0.30 |
| >40Kpa |
|
±0.10 |
±0.20 |
| Hysteresis |
|
±0.05 |
±0.10 |
| Repeatability |
|
±0.05 |
±0.10 |
| Zero output(FS)mv |
-2 |
±1 |
2 |
| Full-scale output(FS)mv |
98 |
100±1 |
102 |
| Operating temperature(ºC) |
-40 |
|
125 |
| Compensation temperature(ºC) |
40Kpa |
0 |
|
50 |
| 100Kpa |
0 |
|
70 |
| >100Kpa |
-10 |
|
70 |
| Zero temperature Error(%FS) |
|
±0.75 |
±1.0 |
| Full-scale temperature Error(%FS) |
|
±0.75 |
±1.0 |
| Temperature Hysteresis (%FS) |
|
0.1 |
|
| Zero long-term stability(±%FS/year) |
|
0.1 |
|
| Full-scale long-term stability(±%FS/year) |
|
0.1 |
|
| Power supply(VDC) |
|
10 |
14 |
| Input resistance(kΩ) |
6 |
8 |
10 |
| Output resistance(kΩ) |
2.5 |
3 |
3.7 |
| Output load resistance(MΩ) |
5 |
|
|
| Insulation resistance (MΩ/50V) |
50 |
|
|
| Pressure range |
0-40KPa…7MPa or 0-10MPa…70MPa |
| Pressure overload 0-40KPa…7MPa |
≤4Mpa |
2times |
| 7Mpa |
1.5times |
| Pressure overload 0-10MPa…70MPa |
≤40Mpa |
2times |
| 70Mpa |
100MPa |
| Measuring medium |
Liquid, gas and steam compatible with 316L stainless steel |
JC-CG01 Piezoresistive Pressure Sensor
| Parameters |
MIN. |
TYP. |
MAX. |
| Linearity %FS, BFSL |
|
±0.15 |
±0.25 |
| Repeatability %FS |
|
±01 |
|
| Hysteresis %FS |
|
±0.05 |
±0.1 |
| Zero output mV DC |
|
±2 |
|
| FS Output mV DC |
50 |
|
|
| Zero thermal error %FS/ºC |
±0.02 |
|
|
| FS Thermal error %FS/ºC |
±0.03 |
±0.75 |
1.5 |
| Compensated temperature ºC |
|
-10~70 |
|
| Storage temperature ºC |
|
-20ºC~65ºC |
|
| Stability %FS |
|
±0.2 |
±0.3 |
Electric
Performance |
Power supply |
1.5mA (typ) |
| Electric connection |
Kovar pin or 100mm silicon rubber flexible wires |
| Input impedance |
2kΩ~6kΩ |
| Output impedance |
2kΩ~6kΩ |
| Insulation resistor |
250MΩ/250VDC |
|
Overpressure |
<6MPa,2timesFS;(6~60)Mpa,1.5times FS;
Differential pressure or Low pressure range,1.3times FS |
| Pressure type |
G: Gauge; A: Absolute; S: Sealed gauge |
| Media compatibility |
The gas or liquid which is compatible with construction material and Viton |
| Impact |
100g(11ms) |
| Position |
Deviate 90° from any orientation, zero change ≤0.05%FS |
| Construction |
Diaphragm,Housing |
stainless steel 316L |
| Pin |
Kovar |
| O-ring |
Viton |
| Net weight |
30g (general type);50g(flush diaphragm);150g(assembled type) |
JC-CT02 Piezoresistive Pressure Sensor
| Parameter |
≤5PSI |
| MIN |
| Span mV |
50 |
| Zero pressure output mV |
-2.0 |
Non-linearity
%Span |
Absolute/Gage |
1psi: -0.30 to 0.30 / 5psi: -0.20 to 0.20 |
| Vacuum Gage |
|
| Hysteresis %Span |
-0.10 |
| Repeatability %Span |
|
| Input Resistance KΩ |
2 |
| Output Resistance KΩ |
4 |
| Temperature Error-Span %Span |
-1.0 |
| Temperature Error-Offset %Span |
-1.0 |
| Thermal Hysteresis-Span %Span |
-0.25 |
| Thermal Hysteresis-Offset %Span |
-0.25 |
| Long-term stability-Span %Span/year |
|
Long-term
stability-Offset %Span/year |
Absolute and Gage |
|
| Vacuum Gage |
|
| Supply Current mA |
0.5 |
| Output Load Resistance MΩ |
5 |
| Insulation Resistance MΩ(50VDC) |
50 |
| Output Noise uV p-p (10Hz to 1KHz) |
|
| Response Time ms (10% to 90%) |
|
| Pressure Overload Rated |
1psi 10X max; 5psi: 3X max |
| Pressure Burst Rated |
1psi: 12X max; 5psi: 4X max |
| Compensated temperature °C |
1psi: 0 to 50; 5psi: 0 to 70 |
| Operating temperature °C |
-20 |
| Storage Temperature °C |
-50 |
| Media - Pressure Port |
Liquids and Gases compatible with 316/316L Stainless Steel |
| Media - Reference Port |
Compatible with Silicon, Pyrex, Gold, Fluorosilicone Rubber, and 316/316L Stainless Steel |
JC-CW02 Piezoresistive Pressure Sensor
Specifications of current excitation(1.5mA, 25ºC)
| Parameter |
Min. |
Typical |
Max. |
| Accuracy(%FS) |
|
|
|
| Non-linear |
30Kpa |
±0.20 |
±0.30 |
|
| Hysteresis |
|
±0.05 |
±0.10 |
| Repeability |
|
±0.05 |
±0.10 |
| Output(mV) |
|
|
|
| Zeron Output(FS) |
-2 |
±1 |
2 |
| Full-scale output(FS) |
50 |
|
|
| Temperature |
|
|
|
| Operating temperature(ºC) |
-40 |
|
125 |
| Compensation temperature(ºC) |
30Kpa |
0 |
|
50 |
| Zero temperature error(%FS) |
|
±0.75 |
±1.0 |
| Full-scale temperature error(%FS) |
|
±0.75 |
±1.0 |
| Temperature hysteresis(%FS) |
|
0.1 |
|
| Long-term stability(±%FS/year) |
|
|
|
| Zero |
|
0.1 |
|
| Full-scale |
|
0.1 |
|
| Supply current(mA) |
0.5 |
1.5 |
2 |
| Input impedance(kΩ) |
2 |
2.5 |
3 |
| Output impedance(kΩ) |
2.5 |
3 |
3.7 |
| Output load resistance(MΩ) |
5 |
|
|
| Insulation resistance(MΩ/50V) |
50 |
|
|
Specifications of voltage excitation(10VDC 25ºC)
| Parameter |
Min. |
Typical |
Max. |
| Accuracy(%FS) |
|
|
|
| Non-linear |
30Kpa |
|
±0.20 |
±0.30 |
| Hysteresis |
|
±0.05 |
±0.10 |
| Repeability |
|
±0.05 |
±0.10 |
| Output(mV) |
|
|
|
| Zeron Output(FS) |
-2 |
±1 |
2 |
| Full-scale output(FS) |
50 |
100±1 |
152 |
| Temperature |
|
|
|
| Operating temperature(ºC) |
-40 |
|
125 |
| Compensation temperature(ºC) |
30Kpa |
0 |
|
50 |
| Zero temperature error(%FS) |
|
±0.75 |
±1.0 |
| Full-scale temperature error(%FS) |
|
±0.75 |
±1.0 |
| Temperature hysteresis(%FS) |
|
0.1 |
|
| Long-term stability(±%FS/year) |
|
|
|
| Zero |
|
0.1 |
|
| Full-scale |
|
0.1 |
|
| Supply voltage(VDC) |
|
10 |
14 |
| Input impedance(kΩ) |
6 |
8 |
10 |
| Output impedance(kΩ) |
2.5 |
3 |
3.7 |
| Output load resistance(MΩ) |
5 |
|
|
| Insulation resistance(MΩ/50V) |
50 |
|
|
Ordering Information:
JC-CZ04 Piezoresistive Pressure Sensor
| JC-CZ04 |
Pressure Sensor |
| Code |
Description |
| JC-CZ04 |
Dia Φ 18mm |
| |
Code |
Power Supply |
| V |
Constant voltage |
| xxx |
Constant current |
| |
Code |
Pressure Range |
| 40K |
0-40Kpa |
| 100K |
0-100Kpa |
| 160K |
0-160Kpa |
| 400K |
0-400Kpa |
| 600K |
0-600Kpa |
| 1M |
0-1Mpa |
| 1.6M |
0-1.6Mpa |
| 2.5M |
0-2.5Mpa |
| XX |
customized |
| |
Code |
Pressure Type |
| G |
Gauge Pressure |
| SG |
Seal Gauge Pressure |
| |
Code |
Electric |
| 1 |
Connector Pin |
| 2 |
Ribbon cable 90mm |
| X |
customized |
JC-CZ01 Piezoresistive Pressure Sensor
| Model |
Descrption |
| JC-CZ01 |
Dia.Φ 19mm |
| |
Code |
Powder Supply |
| C |
Constant current |
| V |
Constant voltage |
| |
Code |
Pressure Range |
| 40K |
0-40Kpa |
| 100K |
0-100Kpa |
| 160K |
0-160Kpa |
| 400K |
0-400Kpa |
| 600K |
0-600Kpa |
| 1M |
0-1Mpa |
| 1.6M |
0-1.6Mpa |
| 2.5M |
0-2.5Mpa |
| 4M |
0-4Mpa |
| 7M |
0-7Mpa |
| 10M |
0~10MPa |
| 20M |
0~20MPa |
| 40M |
0~40MPa |
| 70M |
0~70MPa |
| XX |
customized |
| |
Code |
Pressure Type |
| G |
Gauge pressure |
| A |
Absolute pressure |
| SG |
Seal Gauge pressure |
| |
Code |
Electric |
| 1 |
Connector pin |
| 2 |
Ribbon Cable 90mm |
| X |
customized |
JC-CG01 Piezoresistive Pressure Sensor
| JC-CG01 Piezoresistive OEM Pressure Sensor |
| JC-CG01 |
Dia. Φ19mm |
| |
Code |
Pressure range |
Pressure type |
| 17K |
17KPa |
G |
| 35K |
35KPa |
G |
| 70K |
70KPa |
G |
| 100K |
100KPa |
G,A |
| 200K |
200KPa |
G,A |
| 350K |
350KPa |
G,A |
| 700K |
700KPa |
G,A |
| 1.4M |
1.4MPa |
G,A,S |
| 2.1M |
2.1MPa |
G,A,S |
| 3.5M |
3.5MPa |
A,S |
| 7M |
7MPa |
A,S |
| 17M |
17MPa |
A,S |
| 35M |
35MPa |
A,S |
| 60M |
60MPa |
A,S |
| |
Code |
Power supply |
| C |
1.5mA |
| V |
5V(TYP.),Other(OEM) |
| |
Code |
Temperature compensated type |
| R |
Compensated by resistors |
| |
Code |
Electric connection |
| 2 |
silicon rubber flexible wires |
JC-CT02 Piezoresistive Pressure Sensor
| JC-CT02 Pressure Sensor |
| Model |
Description |
| JC-CT02 |
Dia. 19mm |
| |
Code |
Power Supply |
| V |
Constant Voltage |
| C |
Constant current |
| |
Code |
Pressure Range |
Negative |
Gauge |
| 6 |
0~6KPa |
|
* |
| 30 |
0~30KPa |
|
* |
| 100 |
0~100KPa |
* |
* |
| 200 |
0-200Kpa |
* |
* |
| 350 |
0-350Kpa |
* |
* |
| 700 |
0~700Kpa |
* |
* |
| 2K |
0-2Mpa |
* |
* |
| 5K |
0-5.5Mpa |
* |
* |
| XX |
Customized |
| |
|
Code |
Wire system |
| W1 |
Pin |
| W2 |
Flat cable 90mm |
| X |
Customized |
JC-CW02 Piezoresistive Pressure Sensor
| JC-CW02 pressure sensor |
| Model |
Descrption |
| JC-CW02 |
Dia Φ19mm |
| |
Code |
Power Supply |
| |
C |
current |
| |
V |
voltage |
| |
|
Code |
Pressure Range |
| |
|
30 |
0-30Kpa |
| |
|
XX |
Customized |
| |
|
|
Code |
Pressure Type |
| |
|
|
G |
Gague Pressure |
| |
|
|
A |
Absolute Pressure |
| |
|
|
SG |
Seal Gauge Pressure |
| |
|
|
|
Code |
Electrical |
| |
|
|
|
2 |
Ribbon Cable(90mm as default) |
| |
|
|
|
X |
customized |
Audited Supplier 
){kind=link}