Diffusion Silicon Sensor Jc-Cm01

• Customization: Available
• Type: Capacitive Pressure Sensor
• Component: SemiConductor Type
• Model NO.: Diffusion Silicon Sensor Jc-Cm01
• For: Ceramic Pressure Transmitter
• Output Signal Type: Analog Type
• Production Process: Ceramics
• Material: Ceramics
• Thread Type: NPT
• Wiring Type: Two-Wire
• Measuring Medium: Liquid
• IP Rating: IP65
• Certification: CE
• Customized: Customized
• Transport Package: Carton Box
• Trademark: JIUCHENG
• Origin: China
• Production Capacity: 5000PCS/Month

Product Description

Diffusion Silicon Sensor JC-CM01 Overview:
Diffusion silicon sensor JC-CM01 is divided into general type and assembly type, the general product shape, assembly size and sealing method are consistent with the international mainstream similar products, have a strong interchangeability, widely used in pressure compatible media with stainless steel and fluoro rubber Testing.

Assembled type is a general-purpose pressure sensitive element and is assembled into a pressure interface with a standard or a specific thread. Being rigorous tested and screened, using the face sealing or water line sealing, with a flexible structure, and have the same Application occasions with the common products, suitable for assembly and production of various pressure measurement products. Flushable film assembly is suitable for pressure testing in industries like food, medicine, hygiene, etc., and measuring media are likely to foul.

Corrosion-resistant assembly is suitable for pressure testing with highly corrosive media.

Diffusion Silicon Sensor JC-CM01 Features:
-Measuring range 0kPa~20kPa...70MPa
-Gauge, absolute, seal gauge pressure
-constant current and voltage supply
-Isolated structure for a variety of fluid media
-Φ19mm small size OEM Pressure sensitive components
-stainless steel 316L material / Hastelloy C material
-Diaphragm diaphragm optional,titanium structure optional
-Standard male thread pressure connection available

Diffusion Silicon Sensor JC-CM01 Application:
-Industrial Process Control
-Level measurement
-gas liquid pressure measurement
-Pressure testing instruments,
-pressure calibration equipment
-Hydraulic system and switch
-Refrigeration equipment and air conditioning system
-Aviation and navigation inspection
Diffusion Silicon Sensor JC-CM01  Specifications:

Parameter	MIN	TYP	MAX
Non-linear %FS,BFSL		±0.15	±0.25
Repeatability %FS		±0.05	±0.075
Hysteresis %FS		±0.05	±0.075
Zero output mV DC		±1.0	±2.0
Full-scale output mV DC**	50
Zero temperature Error %FS, reference 25ºC		±0.75	±1.0
Full-scale temperature Error %FS, reference 25ºC		±0.75	±1.0
Compensated temperature ºC		0~50
Operating temperature ºC		-40~125
Storage temperature ºC		-40~125
Long-term stability %FS/year		±0.2	±0.3

 

Electrical performance	Power supply	≤2.0mA DC;≤10V DC
	Electrical connection	φ0.5mm Gold plated Kovan pins
	Common mode voltage output	50% of input(TYP)
	Input impendence	3kΩ~8kΩ
	Output impendence	3.5kΩ~6kΩ
	Response (10%~90%)	<1ms
	Insulation resistance	100MΩ,100VDC
	Allow overpressure	1.5times of full-scale or 110MPa, take the min.
Electrical performance	Diaphragm material	Stainless steel 316L
	Housing material	Stainless steel 316L, 304L
	Pin	Gold-plated kovar
	O-ring	fluororubber
	Net weight	Approx. 23g(general type);
		Approx. 50- 125g(assembly type);
Ambient temperature	Location effects	Deviation from 90 ° in any direction, zero change ≤ ± 0.05% FS
	vibration	No change under (20 ~ 2000) Hz conditions in10gRMS
	Impact	100g,11 ms
	Media compatibility	Liquid or gas compatible with stainless steel and fluororubber
	Media temperature	(25±1)ºC
Base condition	Ambient temperature	(25±1)ºC
	Impact	0.1g(1m/s2)Max
	Humidity	(50%±10%)RH
	Environmental pressure	(86~106)kPa
	Power supply	(1.5±0.0015)mA DC

Diffusion Silicon Sensor JC-CM01 Ordering information:

JC-CM01 Diffusion silicon sensor
JC-CM01	Dia. 19mm
	Code	Pressure range	Pressure type	Code	Pressure Range	Pressure type
	20K	0~20KPa	G	2M	0~2MPa	G,A
	35K	0~35KPa	G,A	3.5M	0~3.5MPa	G,S,A
	70K	0~70KPa	G,A	7M	0~7MPa	S,A
	100K	0~100KPa	G,A	10M	0~10MPa	S,A
	200K	0~200KPa	G,A	20M	0~20MPa	S,A
	350K	0~350KPa	G,A	35M	0~35MPa	S,A
	700K	0~700KPa	G,A	70M	0~70MPa	S,A
	1000K	0~1000KPa	G,A
		Code	Pressure Type
		G	Gauge
		A	Absolute
		S	Seal Gauge
			Code	Additional function
			W5	M20×1.5 external thread	M24×1 internal thread
			W6	G1/4 external thread
			W7	G1/2 external thread
			W10	1/4NPT external thread
			W12	1/2NPT external thread
			W14	R1/4 external thread
			W15	R1/2 external thread
			Q1	Flush diaphragm pressure interface
				Customized
				Code	Temperature compensation Mode
				L	Laser trimming resistor compensation
					Code	Electric connection
					1	Gold-plated kovar pins (default)
						Code	Special measurement
						Y	Gauge pressure can measure the negative pressure  (-100kPa~0kPa)

Note:
1. The assembly of pressure sensitive elements is recommended to use a "suspension" structure to avoid tightening the seal on its end face to prevent the stability of the pressure sensitive element.

2. Pay attention to protecting the isolation diaphragm at the front end of the pressure sensitive element and the ceramic thick film compensation circuit board at the back end, so as not to cause impact damage on the performance of the pressure sensitive element or cause damage to the pressure sensitive element.

3. The temperature range of fluorocarbon sealing ring marked by sensitive components is -20 to 250 degrees. Please contact our company when the working temperature range of sensitive components is below -20 C, or sensitive elements are applied in harsh media,.