JC-C01 Flush Diaphragm Ceramic Pressure Sensor Intruduction:
JC-C01 ceramic pressure sensor are made with a ceramic base plate and a flush diaphragm and work following the piezoresistive principle.
The Wheatstone bridge is screen printed on one side of the flush ceramic diaphragm which is, in turn, glued to the sensor's body. The bridge faces the inside where a cavity is made and the diaphragm's opposite side can therefore be exposed directly to the medium to be measured.
Because of the Al2O3 ceramic excellent chemical resistance (aggressive gases, most of solvents and acids, etc.), no additional protection is normally required. JC-C01 sensors are thermally compensated by laser-adjustable PTC resistors and the use of ceramic ensures a high linearity across the entire range of measurement, reducing effects of hysteresis to a minimum.
JC-C01 Flush Diaphragm Ceramic Pressure Sensor Features:
* Sturdy ceramic sensitive diaphragm
* Zero point, full-scale laser calibration
* Excellent corrosion resistance and wear resistance
* Anti-impact, anti-vibration
* High precision, high stability
* Wide operating temperature range
* Small size, easy to package
Technical Parameters:
| Pressure range |
100KPa ~60MPa |
| Dimension |
φ18x5.25mm |
| Power supply |
5~ 30V DC |
| Bridge impedance |
11KΩ±20% |
| Response time |
< 1mS |
| Accuracy (linear, hysteresis, repeatability) |
0.2 ~ 0.4 FS% |
| Zero drift |
±0.2mV/V |
| Insulation resistance |
>2kv |
| Output of full scale |
2.0 ~4.8mV/V |
| Temp. characteristics: (Temp. compensation range: 0 ~ 70 °C) |
±0.015%FS/°C |
| Operating temperature |
-40~125 °C |
| Stability |
<0.2%FSO/year |
Ordering Information:
| Type |
Pressure Range(bar) |
Overload (bar) |
Break Pressure(bar) |
Sensitivity (mV/V) |
| JC-C01-0.5 |
0…0.5 |
1 |
2 |
1.5/2.4 |
| JC-C01-1 |
0…1 |
2 |
4 |
2.0/3.5 |
| JC-C01-2 |
0…2 |
4 |
5 |
2.0/4.0 |
| JC-C01-5 |
0…5 |
10 |
12 |
2.4/4.5 |
| JC-C01-10 |
0…10 |
20 |
25 |
3.6/6.0 |
| JC-C01-20 |
0…20 |
40 |
50 |
2.4/4.0 |
| JC-C01-50 |
0…50 |
100 |
120 |
4.0/6.5 |
| JC-C01-100 |
0…100 |
200 |
250 |
3.1/4.8 |
| JC-C01-200 |
0…200 |
400 |
500 |
2.5/3.9 |
| JC-C01-400 |
0…400 |
650 |
650 |
3.1/4.8 |
| JC-C01-600 |
0…600 |
880 |
880 |
3.1/4.8 |
Note:
1. Different batches of products may have different printing colors
2. Can be used for down-range and the amplitude is controlled within ±50%FS.
3. The maximum pressure of the system should be less than the overload protection limit of the sensor, otherwise it will affect the service life of the product and damage the product.
4. Do not force to pull the pins or the leads of sensitive components.
5. Protect the isolation diaphragm at the front end of the pressure sensitive component to prevent the impact of the pressure sensitive component from damaging the sensitive component.
6. If you have special requirements on product performance parameters and functions, please contact us.
About Jiucheng
Qualification and Certificate:
Product Packaging:
We choose cartons and protective pads that can be recycled. This will maximize the protection of our products from damage during transportation.
Product Transportation:
We only choose the global express service providers. We will deliver the goods to you at the most efficient speed.
Audited Supplier 
){kind=link}