Jc-CS01 Piezoresistive Ceramic Pressure Sensor

• Customization: Available
• Material: Stainless Steel
• Certification: CE
• Model NO.: JC-CS01
• Weight: ≤ 5 (Ceramic Cell Only)
• Response Time: ≤ 1
• Supply Voltage: 2...30
• Offset: See Ordering Code, Other Available on Request
• Current Cons.: ≤ 1.3 @ 10V
• Operating Temperature: 40...+135
• Storage Temperature: -40...+150
• Impedance: 11 ± 30%
• Trademark: jiucheng
• Origin: Nanjing, China

Product Description

JC-CS01 Piezoresistive Ceramic Pressure Sensor Overview:
Jiucheng JC-CS01 monolithic pressure sensors are made with a ceramic cell and  work following the piezoresistive principle. The Wheatstone bridge is screen  printed directly on one side of the ceramic diaphragm by means of Thick Film technology. The diaphragm's opposite side can be exposed directly to the medium to  be  measured.  Because  of  the  Al2O3   ceramic  excellent  chemical  resistance (aggressive gases, most of solvents and acids, etc.), no additional protection is normally required. Thanks to the reinforced outer area (monolithic structure), the sensor can be mounted directly in a plastic or metallic case by using O-ring. JC-CS01 sensors are designed in such a way so that temperature changes and pressure overloads do not cause loss in reliability. Jiucheng JC-CS01 sensors ensure optimal linearity across the entire range of measurement and minimize effects of hysteresis. 

JC-CS01 Piezoresistive Ceramic Pressure Sensor Features:
* Excellent resistance to corrosion and abrasion
* Optimized for high pressure applications
* Easy mounting 
* Customizable

Jiucheng Pressure Sensors Family Tree:


Mechanical drawings and electrical schematics:


Electrical terminations:


Technical Parameters:

Parameters	Units	Description
Sensor type	-	Monolithic, gauge
Technology	-	Piezoresistive
Material	-	Ceramic Al2O3 96%
Weight	g	≤ 5 (ceramic cell only)
Response time	ms	≤ 1
Supply voltage range	VDC	2...30
Offset	mV/V	See ordering code, other available on request
Current consumption	mA	≤ 1.3 @ 10V
Operating temperature	°C	-40...+135   (-40 °F...+275 °F) 1
Storage temperature	°C	-40...+150   (-40 °F...+302 °F) 1
Bridge impedance	kΩ	11 ± 30%

Nominal pressure FSO	bar	2	5	10	20	50	100	200	250	400
	psi 2	29	73	145	290	725	1450	2900	3625	5800
Overload pressure	bar	4	10	20	40	100	200	300	375	500
	psi 2	58	145	290	580	1450	2900	4350	5440	7250
Burst pressure	bar	8	20	35	60	140	300	400	500	650
	psi 2	116	290	507	870	2030	4350	5800	7250	9425
Vacuum capability	bar	-0.8	-0.9	-1	-1	-1	-1	-1	-1	-1
	psi 2	-11.6	-13.1	-14.5	-14.5	-14.5	-14.5	-14.5	-14.5	-14.5
Sensitivity²	mV/V	1.8...3.4	2.0...3.5	2.4...4.0	2.8...4.2	2.7...4.0	2.0...3.2	1.8…3.3	1.5…3.0	1.5…3.0
Accuracy   (typ./max.)	%FS	0.15 / 0.5	0.15/0.30	0.15/0.30	0.15/0.30	0.25/0.60	0.50/1.00	0.50/1.00	0.50/1.00	0.60/1.20
Cavity diameter	mm	9.7	9.7	9.7	9.7	9.7	5.6	5.6	5.6	5.6
Thermal offset  shift (typ./max)	%FS/K	± 0.025 / ± 0.050		25 °C...85 °C   (77 °F...185 °F)				Not compensated
		± 0.005 / ± 0.020		25 °C...85 °C   (77 °F...185 °F				Compensated
Thermal span shift	%FS/K	≤ ± 0.010		0 °C...70 °C				(32 °F...158 °F)
		≤ ± 0.012		-25 °C...0 °C / 70 °C...85 °C				(-13 °F...32 °F / 158 °F...185 °F)
		≤ ± 0.014		-40 °C...-25 °C / 85 °C...135 °C				(-40 °F...-13 °F / 185 °F...275 °F)
Reliability tests 5	-	1000 hours @85 °C (185 °F) & 85 %RH				500 thermal shocks -40°C...+150 °C (-40 °F... +302 °F)
		1000 hours burn-in @150 °C (302 °F)				1 million 0 bar to Pnom pressure cycles

Tests performed at 25°C in Jiucheng housings, unless otherwise specified. Different housings may affect performances.
1.Temperature limits depend on connection type, see box "Other types available" on page 4
2.Psi values for reference only.
3.The sensitivity of each production batch is constant, within the indicated range and with minimal dispersion.
4.Accuracy =√NonLinearity2+Hysteresis2 +NonRepeatability2, terminal based.
5.All technical characteristics will remain within indicated ranges performing the above-mentioned reliability tests.

Conversion tools:



Ordering Information: