| Customization: | Available |
|---|---|
| Type: | Normal Pressure Transmitter |
| Structure Type: | Diffused Silicon Pressure Transmitter |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Measuring Range | 0~100Pa…100KPa | |
| Overload Capability | 1.5~2 times full-scale pressure | |
| Burst Pressure | 4xFS | |
| Durability | >1×107 cycle(P:0~FS) | |
| Pressure Type | Gauge / Absolute | |
| Measuring medium | Dry clean gas compatible with 304 stainless steel | |
| Response time | ≤4ms | |
| Resolution | Minimum. 0.5Pa | |
| Accuracy (linear,hysteresis, repeatability) | Typical:±0.5%FS Typical:±1%FS(below 250Pa) |
Maximum:±1%FS Maximum:±2%FS(below 250Pa) |
| Long-term stability | Typical:±0.2%FS/year | Maximum:±0.3%FS/year |
| Zero temperature drift | Typical:±0.02%FS/ºC | Maximum:±0.05%FS/ºC |
| Sensitivity temperature drift | Typical:±0.02%FS/ºC | Maximum:±0.05%FS/ºC |
| Medium Temperature | -40~100ºC |
| Ambient Temperature | -40~85ºC |
| Compensation Temperature | -20~80ºC |
| Vibration resistance | 10g IEC 60068-2-6 |
| Impact resistance | 100g/1ms IEC 60068-2-27 |
| EMC- launch | EN61000-6-3 |
| EMC- anti-interference | EN61000-6-2 |
| Insulation resistance | >100MΩ/100V |
| Shell Protection | Plug type(IP65); Cable type(IP67) Compliance IEC 60529 standard |
| Certification | CE |
| Code | Standard signal (with short circuit protection) | Supply voltage with polarity protection | Power supply- Current | Load(R) | Output Impendence |
| A1 | 4~20mA | DC 9~30V | Max.25mA | R≤(U-9)/0.02Ω | |
| V1 | 1~5V DC | DC 9~30V | 8mA | R≥50kΩ | <2kΩ |
| V2 | 0~5 V DC | DC 9~30V | 8mA | R≥50kΩ | <2kΩ |
| V3 | 0.5~4.5V DC | DC 9~30V | 8mA | R≥50kΩ | <2kΩ |
| V4 | 0.5~4.5V DC | DC 5±0.25V | 8mA | R≥50kΩ | <2kΩ |
| Interface and housing | Stainless Steel 304L |
| O-ring | Silicone Rubber |
| Sensor Diaphragm | Silicon wafer(measured dry ,dust-free, non-corrosive or weakly corrosive, clean gas) |
| Weight | Approx.150g |
| JC30 | G | 01KN | A1 | F2 | W2 |
| Model | Pressure type | Pressure Range | Output | Mounting thread | Electrical connections |
| JC30
|
G=Gauge or wind/air pressure D=Differential Pressure |
002C= ±200Pa G/D 005C= ±500Pa G/D 01KC= ±1KPa G/D 02KC= ±2KPa G/D 05KC= ±5KPa G/D 10KC= ±10KPa G/D 005N= -500Pa G/D 01KN= -1KPa G/D 02KN= -2KPa G/D 05KN= -5KPa G/D 10KN= -10KPa G/D 20KN= -20KPa G/D 002P= 200Pa G/D 005P= 500Pa G/D 01KP=1KPa G/D 02KP= 2KPa G/D 05KP= 5KPa G/D 10KP= 10KPa G/D 20KP= 20KPa G/D 40KP= 40KPa G/D 001B= 100KPa G/D |
A1=4~20mA V1=1~5V V2=0~5V V3=0.5~4.5V V4=0.5~4.5V/5V |
F1=M20x1.5male F2=G1/4male F5=Ф8 gas nozzle F0= Customize |
W1=Straight Out 1m W2=A type HSM plug W3=M12 corner out 1m W4=M12 Straight Out 1m |
Model example: JC30G01KNA1F2W3
(JC30 Air Pressure/ Micro Differential Pressure Transmitter; Range 0~1MPa Gauge; Output 4~20mA; Accuracy 0.5% typical; Power Supply 9~30VDC;Pressure Connection G1/4 male thread; Electrical Connection M12 corner out 1m; Selection Remarks: The range meter 01KP=1KPa G/D G indicates the gauge pressure or wind/air pressure, which is the pressure difference with the atmosphere, that is, the wind pressure measurement of a single pressure port, D is the differential pressure measurement, measuring the pressure difference between the two pressure ports. Use the B-copper joint in the outline drawing to connect the negative pressure port, as shown in the outline drawing.
Remarks: It can be customized if the order quantity exceeds a certain amount. Please contact the salesengineers for details.
Our products have been fallen into six categories totaling hundreds of specifications in dozens of series. Main products include: high-accuracy pressure sensor, general-purpose pressure transmitter, liquid level transmitter, anti-lightning/anti-corrosive liquid level transmitter, special pressure transmitter for air conditioner, refrigeration and compressor, special pressure transmitter for oilfield and mining well, economical pressure sensor and transmitter, ceramic capacitor pressure transmitter, vacuum pressure transmitter, sapphire pressure transmitter, digital pressure transmitter, micro differential pressure / air pressure transmitter, intelligent digital pressure gauge, intelligent digital pressure switch, anti-corrosive pressure transmitter, anti-explosive pressure transmitter, hygienically flat-membrane pressure transmitter, high-temperature pressure transmitter, high-frequency pressure transmitter, micro pressure transmitter, integrated temperature transmitter, and capacitance pressure transmitter.
Established in 2006, Nanjing Jiucheng technology Co., Ltd is R&D and production of pressure measuring and controlling instruments. It has introduced the internationally advanced production technology, equipment and process as well as strict product quality standards and ODM cooperation concept to China, so as to manufacture and sell JC pressure / differential pressure / liquid level sensors and transmitters in mainland China.
1.Q: Are you manufacturer or trading company?
A: We are manufacturer which established for 19 years.
2.Q: What's your advantage?
A: We are your technical solutions provider and specialists in resolving complex operational challenges.
3. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
4. Q: What is lead time of your product?
A: 7-15 working days with customization.
5. Q: Can you provide customized products?
A: Yes, we can laser mark your logo on products; OEM and ODM customization are welcomed.
6. Q: What is your MOQ?
A: We have no MOQ limit, even 1 pieces is acceptable.
7.Q:What's your transport?
A: Express such as DHL, FedEx, TNT, UPS for freight prepaid; and we can also use your own courier account to do the freight collect. For more goods we can arrange by air or by Sea.
8. Q: Do you provide customized products?
A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.
9.Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 12 months after shipment, and our after-sales DPT will respond with your questions in 24hrs, remote instruction by PC network is always available.
){kind=link}