JC-CZ11 Oil Filled Sensor, Piezoresistive Silicon Pressure Sensor

• Customization: Available
• Type: Piezoresistive Pressure Sensor
• For: Diffused Silicon Pressure Transmitter
• Model NO.: JC-CZ11
• Output Signal Type: Analog Type
• Production Process: Integration
• Material: Stainless Steel
• Certification: CE
• Customized: Customized
• Pressure Range: 0 ~ 7MPa
• Typical Output: 0 ~ 100mv
• Power Supply: 1.5mA, or 10VDC
• Transport Package: Standard Exporting Carton
• Trademark: JC
• Origin: Nanjing, China
• HS Code: 9026209090
• Production Capacity: 5000 Pieces Per Month

Product Description

JC-CZ11 Oil Filled Sensor Overview:
JC-CZ11 series are based on piezoresistive silicon packaged in a 316 stainless steel housing. The sensing package utilizes silicon oil to transfer pressure from the 316 diaphragm to the sensing element.Three are two options to excitation power--current and voltage.

JC-CZ11 Diffusion Silicon Sensor Features:
-Measuring range: 0kPa~40kPa…7MPa
-Gauge, absolute, seal gauge pressure  
-constant current and voltage supply 
-Isolated structure for a variety of fluid media   
-Φ16.8mm, small size OEM Pressure sensitive components
-stainless steel 316L material / Hastelloy C material 
-Widely temperature compensation -40ºC~125ºC

JC-CZ11 Diffusion Silicon Sensor Application:
-Industrial Process Control
-Level measurement
-gas liquid pressure measurement
-Pressure testing instruments, pressure calibration equipment
-Air Navigation Inspection
-Hydraulic system and switch
-Refrigeration equipment and air conditioning 

Note:
The electrical connection is based on the connection marked on the product parameter card.
1. Dashed left arrow resistance bridge circuit for the sensitive chip bridge.
2 without ceramic compensation board, an external resistor to compensate for zero and temperature drift, the connection as shown. Access to zero resistance R3 (R4), another resistor R4 (R3) shorted as negative power supply; R1 or R2,only one for the zero temperature drift compensation resistor, the another one opens, Choose according to the information provided by the parameter card; R5 is for the sensitivity of temperature compensation resistor, it is recommended that the external compensation resistor be as close as possible to the pressure sensitive element.



Performance Parameters:

Parameters	Min.	Typical	Max.
Accuracy(%FS)Non-Linearity¹40KPa		±0.20	±0.30
Accuracy(%FS)Non  -Linearity¹>40KPa		±0.10	±0.20
Hysteresis		±0.05	±0.10
Repeatibility		±0.05	±0.10
Zero²Output(mV)40KPa	-1.5	±0.7	1.5
Zero²Output(mV)>100KPa	-1	±0.5	1
Span(FS)Output(mV)	70		450
Operation  Temp. (ºC)³	-40		125
Compensated Temp. (ºC)40KPa	0		50
Compensated       Temp. (ºC)>100KPa	-10		70
Zero  Temp.error(%FS)^4		±0.75	±1.0
Span  Temp.error(%FS)^4		±0.75	±1.0
Thermal hysteresis(%FS)		0.1
Long term Stability/Zero(±%FS annual)		0.1
Long term Stability/Span(±%FS annual)		0.1
Supply Current(mA)	0.5	1.5	2
Input Resistance(KΩ)	2	2.5	3
Output Resistance(KΩ)	2.5	3	3.7
Load   Resistance^5(MΩ)	5
Insulation   Resistance(100V)^6(MΩ)	100

Ordering information:

 

JC-CZ11 Pressure sensor
Model JC-CZ11	Description
	Diameter  19mm		O  Ring  mounting
	Code		Power Supply
	C		Constant  Current
	V		Constant   Voltage
			Code		Pressure Range		Gauge		Absolute
						0~40KPa		*
			100K			0~100KPa		*	*
			160K			0~160KPa		*	*
			400K			0~400KPa		*	*
			600k			0~600KPa		*	*
				1M		0~1MPa		*	*
			1.6M			01.6MPa		*	*
			2.5M			0~2.5MPa		*	*
				4M		0~4MPa		*	*
				7M		0~7MPa		*	*
				XX			Customized
Code                Pressure type
G              Vent Gauge Pressure(W/O vent tube as default)
GT                     Vent Gauge Pressure(With vent tube)
A               Absolute Pressure
S	Sealed Gauge
	Code	Electrical Connection
	1	Connect Pins
	2	Ribbon Cable
	X	Special

About Jiucheng
Qualification and Certificate:
Product Packaging:
We choose cartons and protective pads that can be recycled. This will maximize the protection of our products from damage during transportation.