JC-CS01 Ceramic Housing Mv Pressure Sensor with 0~2bar… 0~600bar

• Customization: Available
• Type: Ceramic Pressure Sensor
• For: Ceramic Pressure Transmitter
• Model NO.: JC-CS01
• Production Process: Ceramics
• Material: Ceramics
• Wiring Type: Four-Wire
• Measuring Medium: Gas Liquid Steam
• Customized: Customized
• Pressure Range: 0~2bar…0~600bar(G)
• Dimension: φ18X6.35mm
• Power Supply: 30V DC, Max.
• Bridge Impedance: 11KΩ±30%
• Zero Drift: ≤±0.2mv/V
• Insulation Resistance: >2kv
• Operating Temperature: -40~135ºC
• Sored Temperature: -50~150ºC
• Accuracy: ≤±0.3%Fs
• Repeatability: ≤±0.1%Fs
• Transport Package: Standard Exporting Carton
• Trademark: JC
• Origin: Nanjing, China
• Production Capacity: 50000PCS/Month

Product Description

JC-CS01 Ceramic Pressure Sensor Introduction:
JC-CS01 ceramic pressure sensors are made with a ceramic cell and work following the piezoresistive principle. The Wheatstone bridge is screen printed directly on one side of the ceramic diaphragm by means of Thick Film technology. The diaphragm's opposite side can be exposed directly to the medium to be measured. Because of the Al2O3 ceramic excellent chemical resistance (aggressive gases, most of solvents and acids, etc.), no additional protection is normally required. Thanks to the reinforced outer area (monolithic structure), the sensor can be mounted directly in a plastic or metallic case by using O-ring. 
JC-CS01 sensors are designed in such a way so that temperature changes and pressure overloads do not cause loss in reliability. JC-CS01 sensors ensure optimal linearity across the entire range of measurement and minimize effects of hysteresis. 

JC-CS01 Ceramic Pressure Sensor Features:
* Low cost OEM    
* Wide operable temperature range -40-135 ºC   
* Compatible with corrosive media     
* Small profile and easily to be welded    
* Typical output:3mV/V

JC-CS01 Ceramic Pressure Sensor Application:
* Pneumatic Equipment
* Hydraulic Equipment
* Medical Equipment
* Air Compressors
* Refrigeration Systems
* Battery-powered Equipment

Technical Parameters:

Pressure range	0~2bar…0~600bar(G)
Dimension	φ18x6.35mm
Power supply	30V DC,Max.
Bridge impedance	11KQ±30%
Zero drift	≤±0.2mVN
Insulation resistance	>2kv
Zero long-term stability @20ºC	±0.2%FSO,typical.
Direct contact with liquid material	96%AL2O3
Operating temperature	-40~135ºC
Sored temperature	-50~150ºC
Temperature dift(zero+sensitivity)	≤±0.03%FS/C(2bar~200bar);≤±0.04%FS/C400bar &600bar)
Accuracy(non-linear+Hysteresis)	≤±0.3%FS
Repeatability	≤±0.1%FS

Ordering Information:

Type	Pressure Range(bar)	Break Pressure(*)(bar)	Full Scale output (mV/V)
JC-CSO1-2	0….2	4	2.0/4.0
JC-CSO1-5	0….5	12.5	2.0/4.0
JC-CSO1-10	0...10	25	2.0/4.0
JC-CSO1-20	0.…20	50	2.4/3.6
JC-CSO1-30	0.…30	80	1.8/3.0
JC-CSO1-40	0…40	110	2.4/3.6
JC-CSO1-50	0…50	125	2.4/3.6
JC-CSO1-80	0….80	180	2.4/3.6
JC-CSO1-100	0….100	200	2.0/3.0
JC-CSO1-200	0..200	400	2.0/3.0
JC-CSO1-400	0.…400	600	1.8/3.0
JC-CSO1-600	0…600	800	1.6/2.5

Note:
1. (*): Except for hydroxy acid
Break Pressure is calibrated at normal temperature, please contact us under high or low temperature.
2. Electric connection: Pin or leads
3. Compared with the output of 25 °C in the compensation temperature range
4. Can be used for down-range, and the amplitude is controlled within ±50%FS.
5. The maximum pressure of the system should be less than the overload protection limit of the sensor, otherwise it will affect the service life of the product and damage the product.
6. The commonly used compensation method for products is 1.5mA constant current compensation.
7. Do not force to pull the pins or the leads of sensitive components.
8. Protect the isolation diaphragm at the front end of the pressure sensitive component to prevent the impact of the pressure sensitive component from damaging the sensitive component.
9. If you have special requirements on product performance parameters and functions, please contact us.

More Pressure Sensor / Transmitter