| Customization: | Available |
|---|---|
| Type: | Capacitive Pressure Sensor |
| For: | Capacitive Ceramic Sensor |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Power supply | |
| Supply voltage | 5 V DC stabilized, minimum 4.5 V / maximum 5.5 VInfluence of supply voltage: no influence on linearity / proportional on lower range-value / proportional on span, no influence on temperature compensation |
| Current consumption | Maximum 2 mA at a supply voltage of 5 V |
| Operating conditions: Installation | |
| Orientation | Arbitrary. Operate the sensor system with the diaphragm pointing downwards. Otherwise observe the position dependent zero point shift for small pressure ranges (≤ 400 mbar). |
| Weight | approx. 17 to 23 g, depending on measuring range |
| Operating conditions: Environment | |
| Ambient temperature range | -40 °C to +125 °C (also applies to storage temperature) |
| Degree of protection | IP 00 as per DIN 60529 (IEC529); Climate class 3K3 DIN EN 60721-3-3 |
| Operating conditions: Process | |
| Reference operating conditions | As per DIN IEC 60770, T = 25 °C |
| Media | Gases and liquids |
| Material | Diaphragm: aluminum oxide ceramic Al2O3 (99.9 %) |
| Process temperature limits | -40 °C to +125 °C, compensation temperature -20 °C to +80 °C |
| Thermal change | Thermal change of the lower range-value in the compensation temperature range: max. ±0.75 % of span, with extended specification ±1 % of span |
| Thermal change of output span in the compensation temperature range: max. ±0.5 % of span. With Measuring ranges ≤0.4 bar ±0.8 % of span, with extended specification ±1 % of span | |
| Limiting medium pressure range | Overload limit: see "Ordering information" section, Overload influence: negligible |
| Vacuum resistance | UCS2 with nominal value 400 mbar up to 70 bar: 0 mbar abs |
| UCS2 with nominal value 200 mbar: 500 mbar abs (Version M in Ordering information) | |
| UCS2 with nominal value 100 mbar: 700 mbar abs (Version L in Ordering information) | |
| Ceracore UCS2 | 10 | Sensor range; Overload (other measuring ranges and special versions on request) | |
| A | 0...100 mbar / 10 kPa/1.5 psi absolute; 4 bar/400 kPa/60 psi | ||
| B | 0 to 200 mbar /20 kPa/3 psi absolute; 6 bar/600 kPa/ 90 psi | ||
| C | 0 to 400 mbar /40 kPa/6 psi absolute; 6 bar/600 kPa/ 90 psi | ||
| D | 0 to 1 bar /100 kPa/15 psi absolute; 10 bar/1 MPa/ 150 psi | ||
| E | 0 to 2 bar /200 kPa/30 psi absolute; 18 bar/1.8 MPa/ 270 psi | ||
| F | 0 to 4 bar /400 kPa/60 psi absolute; 25 bar/2.5 MPa/ 375 psi | ||
| G | 0 to 10 bar /1 MPa/150 psi absolute; 40 bar/4 MPa/ 600 psi | ||
| H | 0 to 20 bar /2 MPa/300 psi absolute; 40 bar/4 MPa/ 600 psi | ||
| I | 0 to 40 bar /4 MPa/600 psi absolute; 60 bar/6 MPa/ 900 psi | ||
| J | 0 to 70 bar /7 MPa/1050 psi absolute; 105 bar/10.5 MPa/ 1575 psi | ||
| L | 0 to 100 mbar /10 kPa/1.5 psi relative; 4 bar/400 kPa/ 60 psi | ||
| M | 0 to 200 mbar /20 kPa/3 psi relative; 6 bar/600 kPa/ 90 psi | ||
| N | 0 to 400 mbar /40 kPa/6 psi relative; 6 bar/600 kPa/ 90 psi | ||
| O | 0 to 1 bar /100 kPa/15 psi relative; 10 bar/1 MPa/ 150 psi | ||
| P | 0 to 2 bar /200 kPa/30 psi relative; 18 bar/1.8 MPa/ 270 psi | ||
| R | 0 to 4 bar /400 kPa/60 psi relative; 25 bar/5 MPa/ 375 psi | ||
| S | 0 to 10 bar /1 MPa/150 psi relative; 40 bar/4 MPa/ 600 psi | ||
| T | 0 to 20 bar /2 MPa/300 psi relative; 40 bar/4 MPa/ 600 psi | ||
| U | 0 to 40 bar /4 MPa/600 psi relative; 60 bar/6 MPa/ 900 psi | ||
| V | 0 to 70 bar /7 MPa/1050 psi relative; 105 bar/10.5 MPa/ 1575 psi | ||
| 20 | Calibration; Unit | ||
| A | see additional specification (special measuring ranges with extended specifications) | ||
| 1 | Sensor range; mbar/bar | ||
| 2 | Sensor range; kPa/MPa | ||
| 3 | Sensor range; psi | ||
| UCS2 -A | A | 1 A 1 | AAA | |||
Established in 2006, Nanjing Jiucheng technology Co., Ltd is R&D and production of pressure measuring and controlling instruments. It has introduced the internationally advanced production technology, equipment and process as well as strict product quality standards and ODM cooperation concept to China, so as to manufacture and sell JC pressure / differential pressure / liquid level sensors and transmitters in mainland China.
1.Q: Are you manufacturer or trading company?
A: We are manufacturer which established for 19 years.
2.Q: What's your advantage?
A: We are your technical solutions provider and specialists in resolving complex operational challenges.
3. Q: What is lead time of your product?
A: 7-15 working days with customization.
4. Q: Can you provide customized products?
A: Yes, we can laser mark your logo on products; OEM and ODM customization are welcomed.
5. Q: What is your MOQ?
A: We have no MOQ limit, even 1 pieces is acceptable.
6.Q:What's your transport?
A: Express such as DHL, FedEx, TNT, UPS for freight prepaid; and we can also use your own courier account to do the freight collect. For more goods we can arrange by air or by Sea.
7. Q: Do you provide customized products?
A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.
8.Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 12 months after shipment, and our after-sales DPT will respond with your questions in 24hrs, remote instruction by PC network is always available.
){kind=link}